Technické parametre

Všetky potrubia sa prepláchnu hydroxidom, potom kyselinou a potom vodou. Konečná sterilizácia sa vykonáva parou a sterilnou vodou.

Krones vyfukovačka PET fliaš:

• vyfukovacia formička je rotačného typu,
• 8 formovacích staníc,
• 8 ohrievacích staníc,
• súčasťou sú formy (1 liter, 0,5 litra),
• súčasťou je vysokotlakový kompresor so sušičkou (Atelier Francois),
• súčasťou je chladič na chladenie hrdla foriem,
• priemer hrdla je 38 mm.

Information

For sale the used complete Krones PET blow machine and aseptic PET bottle filling line with speed up to 12 000 bottles per hour.

This is the Krones complete aseptic PET filling line which includes following machines:

• Blowmolder – heating oven for preheating and blowing machine to blow preforms.
• Injector – to clean PET bottles from inside and outside with peracetate acid.
• Rinser – to flash out PET bottles with sterile water and dry out with sterile air.
• Filler – to fill bottles with product.
• Capper – to apply caps on the bottles.
• Checkmat – to check propper amount of the product inside bottle and to check correct application of cap.
• Process control system – control system of the line.
• Sleevematic – to apply shrink sleeves onto the bolltes.
• Shrinkmat – shrinking of the sleeve film.
• Modulpal – to make sixpacks (pack bottles).

Support systems:

• Hygienic center – to prepare cleaning agents.
• Sterile water machine.
• CIP unit.

The line was installed in production premises in 2011. It was put into the operation in 2013.

Filling line capacity is 12 000 bottles per hour. We have two bottles shapes 1L and 0,5L.

Filling volume is adjustable up to 2 L – change of the volume would need to change bottle design.

Last service intervention was finished at the beginning of 2019 so machine is in great condition.

PET blow machine:

• blow molder is rotary type,
• 8 forming stations,
• 8 heating stations,
• molds are included (1 liter, 0,5 liter ),
• high pressure compressor with dryer is included (Atelier Francois),
• chiller for forms neck cooling is included,
• neck diameter is 38mm.

Aseptic PET bottle filling line:

Products possible to be filled on Krones:

• Milk based products (flavoured milks, white milk, ambient joghurt, cream, protein drink)
• Iced tea
• Fruit juices
• All of them were confirmed by Krones as approved drinks to be filled on that filling line.
• Technical parameters of the machine:
• Product milk (up to 3,8%).
• Standardly was also filled cream with fat content 33%.
• Pulp, pith – max. 10%, no fibres.
• Particles 2x2x2 mm, possible to squash, no cores.
• Filling temperature 20°C,
• Content of CO2: 0,0 g (no sparkling water – or would require upgrade od filler line)
• Foaming – no or low foaming (highly foaming product are possible to fill with decreased performance).
• Filling accuracy – according to Gauss curve: Sigma=1,5ml at 500ml, 2ml at 1 000ml.
• The volume range of the filler is from approx. 150ml up to 2 500ml. The height of the bottle can be from 130 to 346mm. Filler type is volumetric.
• 40 filling valves.
• Capper is Servo controlled and it has 16 capping stations.
• We have confirmed by external laboratory shelf life 7 months.
• All piping are flushed with hydroxide then acid and then flushed with water. Final sterilization is done by steam and sterile water.

PET Blower – Contiform S08 ser.num. Kxxxxxx,

PET Filler – Aseptic filler ser.num. Kxxxxxxx.